Dune Firmware Zone


Dune HD Pro 4K (revision tv292a)


Version "190601_0246_r13" (BETA version)
Download: dune_firmware_tv292a_190601_0246_r13.dff
Changes since 190412_0054_r13:
- Realtek models: Updated to newer versions of core components of Realtek
  SDK. This makes it possible to implement various fixes and improvements
  for media playback functionality, but also could cause some regressions
  and new bugs (to be fixed in future firmware updates).

- Realtek models: Maximum supported number of audio tracks per one video
  file is increased to 256.

- Realtek models: Maximum supported number of subtitle tracks per one video
  file is increased to 256. (Up to 256 embedeed subtitle tracks, and up to
  64 external subtitle tracks.)

- Realtek models: Fixed problem that some AVI files were playing with
  stuttering when using internal player. Internal player is now again used
  by default for AVI files (instead of SPMC).

- Realtek models: DSD audio playback (ISO, DSF, DFF) is now supported not
  only via "Internal player (Hi-Fi)" playback engine, but also via
  "Internal player" playback engine, and is now supported on all Realtek
  models (not only on Max 4K and Ultra 4K, as before). This new way for DSD
  audio playback is optimized and is recommended for audio output to the
  standard digital audio outputs (HDMI output and standard S/PDIF output).
  Known limitations: only stereo DSD is supported; audio file should not be
  too long (maximum supported duration is approximately 67 minutes).

- Max 4K: Added correct support for minor hardware changes (power control
  of the built-on fan) in the recent batches of Max 4K (which are shipped
  starting with May/2019).

- Amlogic models: DSD audio playback (ISO, DSF, DFF) is now supported.
  Known limitations: only stereo DSD is supported; audio file should not be
  too long (maximum supported duration is approximately 67 minutes).

- Amlogic models: Improved support for playback of WavPack (.wv) lossless
  audio files.

- Amlogic models (latest generation only: tv174c, tv175e, tv175f, tv175p):
  Added support for launching HTML applications (which can use Dune JS STB
  API) not only via /config/stb_home mechanism (as was supported before),
  but also from PHP plugins.

- All models: Implemented subtitle synchronization correction function
  (same as was previously available on Sigma models, with an improvement
  that synchronization correction is applied to each subtitle track
  individually).

- All models: The setting "Setup / Playback / Control / UP/DOWN buttons"
  now has an additional possible choice "Show playlist menu", which can be
  convenient when watching TV channels, watching TV series, or listening
  music playlists.

- All models: "Movies" menu: Updated per-years categories, added category
  "2019+".

- All models: PowerPoint presentations in PPTX format (.pptx file
  extensions) are now also supported (in addition to previously supported
  PPT format).

- All models: "Android applications" menu now includes a preinstalled item
  for "START.RU" VOD service ( https://start.ru ), which automatically
  installs and launches AndroidTV version (optimized for TV screen) of
  START.RU Android application.

- All models: Kartina.TV application updated to include some new features,
  improvements and fixes which were previously implemented in Kartina.TV
  STBs.

- All models: Small improvements and performance optimizations for TV
  plugins (improved loading of icons and EPG information).

- Some other minor improvements/fixes.

Version "190412_0054_r13" (BETA version)
Download: dune_firmware_tv292a_190412_0054_r13.dff
Changes since 190412_0053_r13:
This version is exactly the same as the version 190412_0053_r13 with just
one change: fix for the problem that the player could hang during boot
sometimes.

Version "190412_0053_r13" (BETA version)
Download: dune_firmware_tv292a_190412_0053_r13.dff
Changes since 190330_0254_r13:
This version adds a lot of new features such as UltraHD (BD4K) BD Menu (for
Realtek models), Netflix 5.1 audio support (for Realtek models), CUE sheets
supports, improved support for various music formats (WavPack, APE, FLAC),
various improvements in the music player, various improvements related to
the use of Hi-Fi audio output (for Max 4K and Ultra 4K models), "TV" menu
item, initial setup wizard improvements, and various other improvements.
NOTE: There were big changes in the core parts of the firwmare, so some
functions may be potentially broken in this version.

- New feature: A new graphical design for the internal audio player: now it
  shows a bigger album picture, with the information about track / album /
  artist below it (similarly to how "Now Playing" screen looks in the new
  Dune Control mobile app), and uses a new background picture.

- New feature: Screensaver is now supported in the internal audio player
  (same as was previously implemented on Sigma platforms).

- New feature: Added support for CUE sheets (same as was previously
  available on Sigma-based models) in internal player.

- New feature: Added a decoder for WavPack audio files (same as was
  previously available on Sigma-based models) in internal player.

- New feature: Realtek models: Added a support for playback of audio files
  in APE (Monkey's Audio) format (same as was previously available on
  Sigma-based models) for internal player. (On Amlogic models, APE playback
  was already supported.

- New feature: Realtek models: Added a new decoder for FLAC audio files
  (same as was previously available on Sigma-based models) in internal
  player, for improved compatibility with various FLAC file format
  variations. This in particular fixes problems with impossibility to time
  seek in some FLAC files. (On Amlogic models, there were no such
  problems.)

- New feature: Added a new main screen item "TV" which can be used as a
  convenient shortcut for quick start of the preferred TV application. The
  TV application can be any Dune HD application or any Android application.
  Added a feature for automatic searching of suitable community TV
  applications in Internet (similarly to how comminity Movies extensions
  are searched). The new setup section "Setup / Applications / TV" can be
  used to modify reconfigure "TV" item and to hide it.

- New feature: The initial setup wizard now has "auto" and "manual" modes,
  "auto" mode tries to avoid asking any questions and configure everything
  automatically. No questions are asked in case of Ethernet connection, and
  only Wi-Fi network is asked to be configured in case of Wi-Fi connection.

- New feature: The initial setup wizard now allows to skip network
  configuration by choosing "None" option.

- Improvement: Added a special optimization which disables Android feature
  to automatically scan of all the connected user storage devices for media
  files (which can be used by some Android applications). This Android
  feature was almost never useful, but was causing unneeded background
  activities and system load (especially when a huge HDD with a lot of
  files is attached), which could nevatively affect the performance of the main
  functionality of the player.

- Improvement: Added a special optimization which disables Android feature
  to automatically create Android system folders and files (used by some
  Android applications) on the connected user storage devices. This Android
  feature was almost never useful, but was causing unneeded writes to user
  storage devices and appearance of undesired files on the storage devices.
  Now such folders and files are created only on a dedicated partition of
  the internal flash memory.

- Realtek models: New version of BD Menu playback engine:

    - New feature: BD Menu playback mode now supports Ultra HD BD images
      (BD4K).

    - New feature: When using the new Dune Control mobile app, in BD Menu
      playback mode, the name of the currently played file is shown in the
      mobile app.

    - New feature: When using the new Dune Control mobile app, in BD Menu
      playback mode, it is now possible to time seek (change playback
      position) in the mobile app; also the current playback position in
      the mobile app is now displayed more correctly.

    - Improvement: Improved support for remote controls with a reduced set
      of buttons:
        - Playback menu can now be shown by first pressing INFO RC button
          to show INFO OSD and then pressing POP UP MENU RC button.
        - Playback can now be stopped by choosing "Exit player" action in
          the playback menu.

    - Improvement: Optimized the performance of handling of BD Menu for
      some BD images, some BD images and some BD scenes in some BD images
      now start faster.

    - Bugfix: Some BD images did not work correctly in some cases.

    - Bugfix: When starting BD Menu playback simultaneously with the
      internal player working in background mode, a hint about TOP MENU RC
      button could be wrongly displayed on the screen.

- New feature: Realtek models: When using Netflix application,
  multichannel (5.1) audio playback is now supported.

- New feature: Amlogic models: when playing IPTV stream via HTTP/TS or HLS
  media streaming protocol, the user can not record the currently played
  stream to the local storage by pressing "REC" RC button (same as it was
  previously implemented on Sigma based models).

- New feature: Amlogic models: the use can now see the current bitrate of
  the currently played media stream in the INFO OSD menu (same as it was
  previously implemented on Sigma based models).

- Improvement: Amlogic models: Improved playback of HLS streams in some
  cases.

- Improvement: Kartina.TV application updated to include some new features,
  improvements and fixes which were previously implemented in Kartina.TV
  STBs.

- Improvements for PHP plugins and PHP API:

   - Added "style=smart_label" feature for button GUI controls.

- Updated/improved UI translations for some languages.

- Some other minor improvements/fixes.

Version "190330_0254_r13" (the latest stable version)
Download: dune_firmware_tv292a_190330_0254_r13.dff
Changes since 181123_2042_r13:
NOTE: The main feature of this firmware update is the support for the new
mobile app ("Dune Control"). It does not include the support for BD4K menu
and the support for CUE in the internal player -- these features will be
included into next versions.

- New feature: Added support the new mobile app ("Dune Control"):
    - Main new features of the new mobile app:
        - Navigator (new):
            - Browse and choose media content via Dune UI shown directly on
              your mobile device.
            - Access local and network sources, Favorites, Recent, My
              Collection, Movies, Dune HD PHP plugins, etc.
            - The menu shown on the mobile device mirrors the menu shown on
              the TV screen.
            - Enter text into text fields in Dune UI using native keyboard
              on your mobile device.
            - Photo viewer mode: view photos from the Dune HD device on the
              mobile device, control photo slide show.
        - Now Playing (new):
            - See the information about the currently played media content,
              including (when available) movie poster, movie title, music
              cover, music album/artist/track information.
            - Control the playback (play/pause, stop, previous/next,
              playback position, volume).
        - Remote (similar as in the old mobile app):
            - Fully replaces the standard IR remote control.
            - Uses Wi-Fi to connect to the local network.
            - Automatically searches for Dune HD devices in the local
              network.
            - Allows to control multiple Dune HD devices and easily switch
              between them.
    - More information and mobile app download:
        - http://dune-hd.com/dunecontrol/

- New feature: Added support for music tags and covers (same as it was
  implemented previously on Sigma-based models.

- New feature: Added support for chapters in MKV files (same as it was
  implemented previously on Sigma-based models.

- New feature: Added simple parental control mechanism for file browser.
  Put "pin_code = NNNN" line into "dune_folder.txt" file in any folder to
  protect this folder by the specified pin code.

- New feature: It is now possible to add the following items to Favorites
  menu: network folders, storages, "Internal Memory" folder.

- New feature: Recent menu now shows movie posters for files which are
  recognized as movies (works when the file was recognized as a movie when
  the file was added to Recent menu).

- New feature: When viewing Movie description in the Movie screen, it is
  now possible to move focus into the description area by pressing RIGHT
  button, and then scroll through the description via UP/DOWN buttons.
  (Helpful when using remote controls w/o P+/P- buttons.)

- New feature: Realtek models: Added automatic detection of the encoding of
  external subtitles, similarly to how it was implemented previously on
  Sigma-based models.

- New feature: Realtek models: The setting "Setup / Audio / Digital audio
  output mode" now have 3 possible choices: "Auto", "PCM (decode)",
  "Original (bitstream)" (default is "Auto").
    - "Auto": use PCM or Bitstream on HDMI output based the capabilities of
      the connected HDMI equipment (automatically detected via HDMI EDID);
      use Bitstream on S/PDIF output.
        - This choice should be suitable in most cases.
    - "PCM (decode)": use PCM on both HDMI and S/PDIF outputs.
        - This choice is useful to force PCM on HDMI output when the
          connected HDMI equipment works incorrectly and provides wrong
          EDID information, or when the connected S/PDIF receiver does not
          support bitstream audio formats (Dolby/DTS), or when it is
          desired to decode bitstream audio formats (Dolby/DTS) on the
          media player side for any other reason.
    - "Original (bitstream)": use Bitstream on both HDMI and S/PDIF
      outputs.
        - This choice is useful to force Bitstream on HDMI output when the
          connected HDMI equipment works incorrectly and provides wrong
          EDID information.

- New feature: Realtek models: Added new setting "Setup / Audio / Maximum
  digital outputs sample rate" with possible choices "Auto" and "192 KHz"
  (default is "Auto" when "Digital audio connector" setting is set to
  "HDMI", "192 KHz" when "Digital audio connector" setting is set to
  "S/PDIF").
    - "Auto": the system automatically detects the maximum allowed sample
      rate based on HDMI EDID information.
        - This choice usually should be used when audio is output via HDMI.
    - "192 KHz": the system allows output of up to 192 KHz sample rate via
      S/PDIF even if HDMI EDID information does not allow 192 KHz.
        - This choice is useful when outputting video directly to a HDMI TV
          (which does not support 192 KHz) and simultaneously outputting
          audio via S/PDIF to an A/V receiver, given that the used A/V
          receiver and the used S/PDIF cable support 192 KHz.

- Improvement: Movie posters are now always displayed with the
  correct/original aspect ratio (previously movie posters could be slightly
  stretched); GUI layout of the screens with movie posters is slightly
  modified correspondingly.

- Improvement: The special support for launching playback via an external
  SPMC/KODI application can now be used not only with SPMC version 16.x (as
  before), but also with SPMC version 17.x and with KODI of any version. If
  any of these alternative SPMC/KODI versions is installed by the user (and
  no other SPMC/KODI versions are installed), the installed version will be
  used (instead of automatically installing SPMC 16.x, as took place
  before). NOTE: The default SPMC 16.x should not be installed or should be
  deleted (if it was installed) in order to use this feature.

- Improvement: Improved support for USB keyboards.

- Improvement: My Collection: when choosing a folder to add to My
  Collection, "Add to collection" action is now always available via POP UP
  MENU. (Helpful when using remote controls w/o SELECT button.)

- Improvement: RC button presses are now better handled during initial
  setup wizard in some cases.

- Improvement: Kartina.TV application updated to include some new features,
  improvements and fixes which were previously implemented in Kartina.TV
  STBs.

- Improvement: Ultra 4K: In Audio Setup, in ESS DAC source setting,
  "Internal source" renamed to "Media player" for better clarity.

- Bugfix: Ultra 4K and Max 4K: When Hi-Fi audio output (XMOS) is used,
  Hi-Fi audio output may become not working in some cases when using
  HiByMusic external app and after that using another player.

- Bugfix: Ultra 4K and Max 4K: When Hi-Fi audio output (XMOS) was enabled,
  and "Digital audio output mode" setting was set to "Bitstream", Hi-Fi
  audio output did not work for bitstream audio formats (Dolby/DTS). Now,
  when Hi-Fi audio output (XMOS) is enabled, the media player automatically
  decodes bitstream audio formats (Dolby/DTS) not depending on "Digital
  audio output mode" setting.

- Bugfix: Realtek models: Stability improvements. Fixed the problem which
  could cause frequent "Application stopped" errors and other system
  instabilities in some cases.

- Bugfix: Realtek models: When Bitstream audio output was enabled, output
  of AAC audio could not work in some cases.

- Bugfix: Realtek models: It was impossible to configure some 4K video
  modes when using specific 4K HDMI equipment which does not fully support
  all HDMI 2.0a features (such as Epson 8300/9300 projectors).

- Bugfix: Realtek models: Switching subtitles could not work in some cases.

- Bugfix: Realtek models: Some HTTP/TS streams could not be played
  correctly (playback restarts and hangups could happen) in some cases.

- Bugfix: Realtek models: When CEC was enabled, TV wakeup could not work
  properly on exiting software standby mode in some cases.

- Bugfix: Amlogic models: Fixed problem with unneeded CPU usage when CEC
  was disabled.

- Bugfix: Amlogic models: Fixed problem that an external storage could not
  be mounted in some cases (because of a problem when attempting to check
  it for filesystem errors)

- Bugfix: Amlogic models: Fixed problem with DHCP client working
  incorrectly in some cases (network connectivity could be lost after a
  while in some cases).

- Bugfix: Amlogic models: Fixed problems with playback of network streams
  in some cases.

- Bugfix: Amlogic models: Some HEVC video files could not be played.

- Bugfix: Amlogic models: When video mode was set to Auto (EDID), this
  could work incorrectly when auto framerate was used in some cases.

- Bugfix: Amlogic models: Extra unneeded HDMI reinitialization could take
  place during boot.

- Bugfix: Traveler: Battery status could be indicated wrongly after
  power-on in some cases.

- Bugfix: When playback was started by IP Control command and screensaver
  was active, screensaver was not cancelled.

- Bugfix: Errors during playback of catchup TV streams could be handled
  wrongly in some cases (restoring Live TV playback instead of restoring
  catchup TV playback).

- Bugfix: Some HLS streams could not be played.

- Bugfix: Fixed problem that navigation buttons (left/right/up/down) did
  not work via IP Control in mouse emulation mode.

- Bugfix: Fixed problem that long-press of POWER RC button was wrongly
  detected faster than in 2 seconds in some cases.

- Bugfix: POP UP MENU could work wrongly in text edit fields in some cases.

- Bugfix: "Play with..." function could work incorrectly in some cases and
  could crash in some cases.

- Bugfix: When Composite video output was used, Setup menu could crash in
  some cases.

- Bugfix: Office files (such as .xlsx) were wrongly not recognized as
  office files in some cases.

- Bugfix: Icons shown in Favorites menu could become incorrect in some
  cases.

- Bugfix: "dune_firmware.dff" file was wrongly highlighted as audio (SACD
  DFF) file.

- Bugfix: GUI hint about D button could be shown incorrectly in some cases.

- Improvements for PHP plugins and PHP API:

    - New feature: Added support for color button actions without captions
      in control folders and regular folders.

    - Bugfix: Parameters for handle_user_input in control dialogs could be
      handled wrongly in some cases.

    - Bugfix: P+/P- buttons could not work correctly in cntrol dialogs in
      some cases.

    - Bugfix: Restoring GUI state in could work wrongly in some cases.

    - Bugfix: When the playback of the current playlist list item (e.g. TV
      series episode) finished in plugin playback mode, and the main menu
      was shown, the system wrongly did not automatically start the
      playback of the next playlist item.

- Improvements in IP Control protocol:

    - IP Control protocol extended with a lot of new features to support
      the new mobile app. In particular, added support for getting detailed
      information about the current UI state, and for controlling the UI
      state, to allow external applications to implement external browsers
      for Dune UI. For more information, see the description of protocol
      version 5 here:
        - http://dune-hd.com/support/ip_control/dune_ip_control_overview.txt

- Updated/improved UI translations for some languages.

- Some other minor improvements/fixes.

Version "181123_2042_r13" (BETA version)
Download: dune_firmware_tv292a_181123_2042_r13.dff
Changes since 181123_2026_r13:
This version is a minor update, it includes:

- Various UI improvements to better support remote controls w/o 0..9,
  SELECT, SETUP buttons (such as the new Dune HD Bluetooth remote control).

- New feature: The setting "Setup / Playback / Control / Stop by RETURN"
  can be used to configure the behavior of RETURN button. The default
  setting is "Yes" (helpful when using remote controls w/o STOP button).
  The setting "No" is helpful when using remote controls with STOP button
  and when the user prefers the old behavior of RETURN button.

- New feature: The setting "Setup / Playback / Control / P+/P- buttons for
  files" can be used to choose "Time seek" (old) or "Switch files" (new)
  behavior. By default the behavior is now "Switch files" (which means
  switch to next/previous file in the playlist, same as when using
  NEXT/PREV buttons). Helpful when using remote controls w/o PREV/NEXT
  buttons.

- Improvement: Kartina.TV application updated to include some new features
  which were previously available only in Kartina.TV STBs and to support
  some changes on Kartina.TV server.

- Some other minor improvements/fixes.

Version "181123_2026_r13" (BETA version)
Download: dune_firmware_tv292a_181123_2026_r13.dff
Changes since 181008_0253_r13:
- New feature: BD3D is now supported in full Blu-ray menu mode too (in
  addition to BD Lite mode, which was supported for BD3D before).
    - Additionally, full Blu-ray menu playback engine reworked and
      optimized to better handle fast forward and rewind, for various other
      playback improvements, for better compatibility with some discs.
    - Note: BD4K is still supported only in BD Lite mode and is not
      supported in full Blu-ray menu mode (work on this is in progress).

- New feature: Office files in formats ".ppt", ".pdf", ".doc", ".docx",
  ".xls", "xlsx" can now be opened directly from the file browser just by
  pressing ENTER on these files. A suitable application is automatically
  launched to open them (and automatically installed if it is not installed
  yet).

- New feature: Added the integration of the famous HiByMusic application
  for playback of audio files:
    - A special TV-optimized version of HiByMusic application (which can be
      fully controled via RC) is installed automatically when needed.
    - HiByMusic application can be launched for playback of audio files in
      various ways -- via POP UP MENU / "Play with..." action, via the new
      setting "Setup / Playback / Parameters / Player for audio files",
      etc.
    - When HiByMusic application is playing audio in background (after
      exiting it via TOP MENU RC button), it can be stopped via STOP RC
      button in Dune HD UI.

- New feature: DSD audio files in DSF and DFF formats can now be launched
  directly from the file browser just by pressing ENTER on these files.
  HiByMusic application is automatically launched to play them (and
  automatically installed if it is not installed yet).

- New feature: When attempting to play SACD ISO (DSD ISO) audio files or
  CUE audio playlist files, a recommendation to use HiByMusic application
  is shown (with the option to directly launch the application) (after that
  these files should be manually found and launched by the user inside
  HiByMusic application; unfortunately, HiByMusic application does not
  support direct launch-file action for these file types).

- New feature: Added a new setting "Setup / Playback / Parameters / Player
  for audio files". May be helpful to use a specific player (e.g.
  HiByMusic) for audio files by default (a an alternative to pressing POP
  UP MENU and then choosing "Play with..." action).

- New feature: Added a new setting "Setup / Playback / Parameters / Player
  for AVI files". May be helpful to use a specific player (e.g. SPMC) for
  AVI files by default (a an alternative to pressing POP UP MENU and then
  choosing "Play with..." action).

- New feature: AVI files are now played by default via SPMC player, to
  workaround the problems with stuttering of AVI files (these problems with
  AVI files stuttering are caused by low level parts of RTD1295 SDK and may
  be fixed in a better way in future, but at the moment they can only be
  fixed by using an external player such as SPMC). In the use of SPMC
  player for AVI files is undesired, the previous behavior of using the
  internal player can be chosen via "Setup / Playback / Parameters / Player
  for AVI files" setting.

- New feature: When SPMC or KODI application is running in background
  (after exiting it via TOP MENU RC button), it can be stopped via STOP RC
  button in Dune HD UI.

- New feature: When using internal player, RETURN RC buttons works as STOP
  (except the case when TV playback is performed and RETURN button is
  configured to work as "Return to previous TV channel"). Helpful when
  using remote controls w/o STOP button.

- New feature: Video files with ".webm" extension can be played now
  directly from file browser.

- New feature: HTTPS media streams now can be played also via M3U files and
  via launch_media_url IP Control command.

- New feature: When a USB keyboard is connected, it now can be used to
  enter English text in text fields in Dune HD UI.

- New feature: PHP API: IP Control commands "light_stop" and
  "set_playback_state" can now be used when PHP plugin is working.

- New feature: PHP API: "update_epg" action can now used even when the main
  menu is shown over the playback.

- New feature: PHP and JS API: Added support to use Widewine DRM with DASH
  video streams from PHP plugins and HTML applications: the new dune_param
  parameters "drm_scheme" and "drm_license_url" can be used to specify the
  required Widevine DRM parameters.

- New feature: Debug dump file can now be generated not only by pressing
  REW or PAUSE button 3 times in the file browser (as before), but also by
  pressing POP UP MENU button, and then pressing TOP MENU buttons. Useful
  when there is no REW and PAUSE buttons.

- Improvement: Debug dump files now should be more useful and contain more
  complete information.

- Improvement: When Setting Reset is performed, this also resets OpenWRT
  settings (previously OpenWRT settings were not reset).

- Improvement: Recovery menu now provides an option to reset OpenWRT
  settings.

- Improvement: V+/V-/MUTE RC buttons now always control playback volume,
  even when playback is not started yet.

- Improvement: Volume control OSD UI improved to not show unneeded UI
  elements.

- Improvement: Volume control OSD UI now handles DOWN/UP buttons as
  MUTE/UNMUTE actions (useful when the used remote control does not have
  MUTE button) and handles LEFT/RIGHT buttons as V-/V+ actions (useful when
  volume control OSD UI is triggered not by V+/V- buttons but by some other
  buttons, and there is no V+/V- buttons). ENTER and RETURN can be used to
  hide volume control OSD UI w/o waiting for timeout.

- Improvement: When playing DASH video streams, the last bandwidth is now
  remembered to ensure more smooth playback start.

- Improvement: When playing DASH video streams, streams with errors (such
  as missing segments) are now played more smoothly.

- Improvement: The initial setup wizard is improved to better handle
  various conditions (such as no Internet connection).

- Improvement: When a question to search for community extensions is shown,
  RETURN RC button can now be used to cancel it.

- Improvement: Various improvements and fixes for Kartina.TV application.

- Bugfix: Pause did not work in some cases.

- Bugfix: Subtitles could wrongly remain on screen for too long time.

- Bugfix: "Discrete-power-off" IR code (often used via IP Control by
  various home automation systems, such as Control4 or Crestron) worked
  wrongly when "Software standby" setting was used -- "Power off" action
  was wrongly performed, which causes impossibility to power on the box via
  IP Control.

- Bugfix: HTTP/MP4 video streams did not work in some cases.

- Bugfix: HTTP/TS video streams did not work in some cases.

- Bugfix: Wrong HDMI video mode could be configured in some rare cases.

- Bugfix: Entering a folder with a big number of ISO files could be slow in
  some cases.

- Bugfix: When performing firmware upgrade, a main menu could be wrongly
  shown before rebooting for a few seconds in some cases.

- Bugfix: The non-supported setting to use LEFT/RIGHT RC buttons during
  playback to control volume was wrongly present in the setup menu.

- Updated/improved UI translations for some languages.

- Some other minor improvements/fixes.

Version "181008_0253_r13" (BETA version)
Download: dune_firmware_tv292a_181008_0253_r13.dff
Changes since 180902_0153_r13:
- Various improvements for Full BD Menu playback support:

    - Improvement: Improved compatibility with specific BD titles (various
      BD titles, which could not be played in Full BD Menu mode before, now
      can be played).

    - Improvement: Added showing of playback position on the front panel
      display also in Full BD Menu mode.

    - Bugfix: BD menu picture could be distored in some cases in Full BD
      Menu mode.

    - Bugfix: Autoresolution and autoframerate did not work properly in
      some cases in Full BD Menu mode.

    - Bugfix: When very quickly switching subtitles in Full BD Menu mode,
      video playback could stutter or hang.

    - Bugfix: Only first 8 audio tracks were available in Full BD Menu
      mode.

    - Some other fixes and improvements for Full BD Menu mode.

- Improvement: Improved support for some Android applications such as
  Netflix.

- Improvement: Minor improvements and fixes in Kartina.TV application.

- Improvement: Added ZOOM support for DASH video streams.

- Improvement: Improved technical information shown for DASH video streams.

- Improvement: Improved support for DASH video streams of VOD type.

- Improvements for the support for USB and Bluetooth keyboards and remote
  controls:
    - F3: enable/disable virtual mouse mode.
    - Alt-F3: SEARCH.

- Bugfix: Copying big files into "Internal Memory" folder could not work in
  some cases.
   - NOTE: To fix this problem, it is required to reset settings once after
     installing the new firmware (in order to reformat the internal flash
     memory partition).
   - NOTE: Resetting settings once after installing this firmware is
     recommended anyway, even if "Internal Memory" feature is not used.
     this will fix some problems in the internal flash memory partition
     which can potentially cause some instabilities.

- Bugfix: When "software standby" mode was used, HDMI output was only
  blanked but was not switched off completely.

- Bugfix: When CEC was enabled, and the media player was switched off, the
  TV was not switched off. Now, the TV is switched off in this case (NOTE:
  because of CEC compatibility issues, may still work not with all TV
  models).

- Bugfix: When SPMC/KODI was used as a player, there could be problems when
  switching to/from SPMC/KODI in some cases.

- Bugfix: Option to resume playback position was wrongly proposed in some
  cases.

- Bugfix: When long-pressing some remote control buttons (such as ENTER)
  the button press could be wrongly handled as multiple presses in some
  cases.

- Bugfix: IP Control: Some IP Control commands did not work correctly in
  some cases.

- Bugfix: HTTP/TS video streams did not work via HTTPS in some cases. 

- Bugfix: HTTP headers (User-Agent and X-Dune-...) were wrongly not sent in
  some cases.

- Some other minor improvements/fixes.

Version "180902_0153_r13" (BETA version)
Download: dune_firmware_tv292a_180902_0153_r13.dff
Changes since 180606_1345_r13:
- New feature: Pro 4K: The first beta version of full BD Menu support.
    - In general, BD Menu support is based on exactly the same engine which
      was previously used in Sigma-based Solo 4K and Duo 4K media player
      models, and has the same features.
    - BD-J is fully supported and compatibility with various discs is
      currently already quite (up to about 95% according to tests performed
      so far).
    - BD Menu mode is supported for both BD ISO files and BDMV folders (and
      also for non-encrypted optical Blu-ray discs via an external optical
      BD drive).
    - Advanced support for seamless branching is implemented, which ensures
      stutter-free playback of any BD discs (even those internally
      consisting of a huge number of small video fragments).
    - HD audio, auto framerate, auto resolution, high bitrate video are
      fully supported (same as in BD Lite mode).
    - BD region choosing is supported (via "Setup / Misc / Blu-ray" menu or
      via hot keys, same as on Sigma-based models).
    - The user can choose between BD Menu and BD Lite modes.
    - The first beta version has the following known limitations, which are
      expected to be addressed in future firmware versions.
        - 3D playback is not supported. 3D discs can currently be played in
          2D mode only (when the disc supports 2D mode).
        - BD4K is not supported.
        - There are issues with a few discs (such as playback does not
          start).
        - FF/REW functions work with some issues.
        - External SRT subtitles are not supported.

- New feature: Pro 4K: Support for external optical disc drives is added.
   - Optical disc drive (BD, DVD, CD) can be connected via USB or SATA.
   - When an optical drive is connected, "Sources / Optical Drive" item
     appears.
   - Optical drive tray can be opened/closed using RC: choose "Sources /
     Optical Drive" item, press POP UP MENU, choose "Eject/Insert".
   - The following optical disc types are supported: CD-*, DVD-*, BD-* data
     discs, non-encrypted DVD-Video discs, non-encrypted Blu-ray discs.
   - The following functionality is supported:
      - Playback of non-encrypted Blu-ray Video discs in BD Menu mode.
      - Playback of non-encrypted Blu-ray Video discs in BD Lite mode.
      - Playback of non-encrypted DVD-Video discs (same functionality as
        when playing DVD-Video ISO file).
      - Playback of files (video, audio, etc -- e.g. MKV, MP3, etc) from
        any data discs (CD-*, DVD-*, BD-*).
      - Copying of files from discs using Dune's file browser to any other
        storage (e.g. to HDD or NAS).
   - When a DVD/BD-Video disc is inserted, the player detects it and shows
     a dialog with the choice to immediately play it. This behaviour can be
     configured via the new Setup menu "Setup / Misc / Optical drive".
   - Multiple optical disc drives can be connected and used simultaneously.

- New feature: IP Control functionality is now more complete, supports
  playback control commands, and generally supports most commands and
  functions which were present in Sigma based Dune HD models.
   - The protocol is the same as was previously used in Sigma based Dune HD
     models: http://dune-hd.com/support/ip_control
   - Integrations which various 3-party home automation systems such as
     Control4, Crestron, etc, which were previously available for Sigma
     based Dune HD models, should now work.

- New feature: A new item "Sources / Internal Memory" now provides a
  convenient way to store any user files in the internal flash memory.
   - Can be shown / hidden via the new setting "Setup / Misc / File Browser
     / Internal Memory item" (default is shown).
   - The files stored in "Internal Memory" folder occupy the same storage
     space which is used to store other media player data and settings,
     including Dune HD plugins and their data, Android applications and
     their data, My Collection index, and other data. In Android
     applications, this folder is available as "DuneHD" subfolder of
     Android internal storage.
   - NOTE: "Internal Memory" folder should be used with care, do not use it
     for huge files, and ensure that there is always free space remaining.

- New feature: My Collection: when several My Collection folders are
  configured, a new item "My Collection / Folder / All folders" can now be
  used to automatically manage all folders (such as start indexing of all
  olders, stop indexing of all folders, view overall indexing status for
  all folders, clear indexing results for all folders, etc).

- New feature: POP UP MENU now has a new command "Play with..." which can
  be used to temporarily choose the player application for a particular
  file. For example, it can be used to play an AVI file via SPMC in case
  when this file does not play good via the default internal player.

- Improvement: Pro 4K: New advanced mechanism of flicker-free auto
  framerate for Internet video streams (when played via Dune HD
  applications).
    - The new advanced mechanism implements the same Dune HD unique (among
      RTD1295 based media players) flicker-free approach for auto framerate
      for Internet video streams which was previously implemented for local
      video files: framerate is detected and video mode is switched before
      the first video frame is shown on the screen that avoid unpleasant
      flickering and interruption of video playback on playback start.
    - Supported for HTTP/TS, HTTP/MP4, HLS video streams.

- Improvement: Pro 4K: Aspect ratio is now correctly detected (and correct
  video zoom settings are applied) not only for files (as before), but also
  for Internet video streams (when played via Dune HD applications).

- Improvement: Pro 4K: Playback of Internet video streams (when played via
  Dune HD applications) is now more stable in case of network errors.

- Improvement: Support for MPEG-DASH streams is improved (better protocol
  compatibility, improved buffering indication).

- New feature: SMB network shares using SMB v2 are now supported. 

- New feature: Plugins can now intercept handling of additional keys in
  plugin folders (such as TOP MENU, STOP, ZOOM).

- Improvement: More correct handling of network errors when playing TV
  archive.

- Improvement: When a USB network connection (e.g. USB LTE modem) is used,
  it is indicated in "Setup / Information" menu and is correctly taken into
  account when waiting for network connection (e.g. when opening an
  application which requires network connection).

- Improvement: When waiting for network connection (e.g. when opening an
  application which requires network connection) and Wi-Fi connection type
  is used, an improved status is shown to the user.

- Improvement: The possibility to show additional technical information
  about the currently played content in "INFO" block via "SELECT" RC
  buttons was not supported or properly indicated in some cases.

- Improvement: When a file with movie association is added to Favorites,
  the information about that movie (movie poster) is now shown in Favorites
  menu too.

- Improvement: The way BD/DVD ISO files are internally identified for the
  purpose of associating them with movies is improved; this will help to
  avoid problems when wrong movie information could be recognized for
  BD/DVD ISO files in some cases.

- Improvement: Fonts for the user interface are extended to support some
  additional languages.

- Improvement: More correct handling of standby timer function in some
  cases, such as when a dialog is opened.

- Improvement: Support for USB and Bluetooth keyboards and remote controls
  is improved to better support various types of keyboards and remote
  controls.
    - ENTER button is now handled in Android applications same way as ENTER
      button on IR remote control (DPAD_CENTER). This fixes some problems
      with some Android applications.
    - The following handling for F1..F12 buttons is now implemented:
        - F1: INFO
        - F2: RECENT
        - F3: SEARCH / reserved
        - F4: SETUP
        - F5: MODE
        - F6: ZOOM
        - F7: AUDIO
        - F8: SUBTITLE
        - F9/F10/F11/F12: A/B/C/D
        - Shift+F1/F2/F3/F4: A/B/C/D
        - Shift+F5: ANGLE/ROTATE (Refresh)
        - Shift+F6: TV
        - Shift+F7: MOVIES
        - Shift+F8: MUSIC
        - Shift+F9: PLAY/PAUSE
        - Shift+F10: STOP
        - Shift+F11: MUTE
        - Shift+F12: EJECT

- Improvement: Text editor fields in Dune GUI are improved to better
  support input devices w/o color buttons:
    - POP UP MENU for text fields now contains "Show/Hide Keyboard" and
      "Clear Text" actions.
    - ENTER button on a text field now works as "Show Keyboard" (even when
      text field is not empty).

- Improvement: Parental code dialog in Dune GUI (used in some TV
  applications) is improved to support input devices w/o 0..9 buttons:
    - A special on-screen keyboard with 0..9 buttons in now shown.

- Improvement: Volume Control GUI is improved to better support input
  devices w/o V+/V-/MUTE buttons:
    - DOWN/UP buttons can now be used as MUTE/UNMUTE.
    - LEFT/RIGHT buttons can now be used as V-/V+.
    - Both ENTER and RETURN buttons close Volume Control.

- Improvement: Virtual mouse is improved to make it more convenient to move
  the mouse cursor via arrow buttons.

- Improvement: Pro 4K: When HDMI CEC is enabled (in "Setup / System" menu),
  it now has more chances to work with some TV models, in particular, to
  switch TV on when the media player is switched in (although compatibility
  with TV models is still limited).

- Improvement: Debug dump files now include more correct information and
  may be more useful.

- Bugfix: Pro 4K: HEVC files could not be played in some cases.

- Bugfix: Pro 4K: The media player could spontaneously exit standby mode in
  some cases.

- Bugfix: Pro 4K: Network connections could be spontaneously
  reset/restarted in some cases, that could cause undesired interruption of
  network playback or long file copying operations.

- Bugfix: HDDs and other types of storage devices in some cases could not
  be recognized by the system and were wrongly shown as inaccessible items
  in "Sources" menu.

- Bugfix: When a USB keyboard was connected/disconnected from the media
  player, or a Bluetooth device was activated/deactivated, this caused
  restart of the user interface.

- Bugfix: NFS encoding and EXT2/EXT3 encoding settings were shown in Setup
  menu but did not work; now NFS encoding setting is fixed and works
  correctly; EXT2/EXT3 setting is removed because it is not supported on
  Android models.

- Bugfix: An attempt to view GIF files in photo viewer could cause hangup.

- Bugfix: My Collection: "Update Movies Data" action could hang in some
  cases.

- Updated/improved UI translations for some languages.

- Some other minor improvements/fixes.

Version "180606_1345_r13"
Download: dune_firmware_tv292a_180606_1345_r13.dff
Changes since 180426_1318_r13:
- New feature: When working with Movies or My Collection functions, on
  Movie screen, the new section "Similar" shows the list of
  similar/recommended movies. NOTE: To eanble this feature for movies which
  are part of My Collection, they should be reindexed (remove indexed data
  and then perform indexing again).

- New feature: Fast forward (FF) and fast rewind (REW) are now supported in
  Dune HD internal player.

- New feature: Picture settings (brightness, contrast, saturation, hue) can
  now be adjusted during video playback, when using Dune HD internal
  player, same as on Sigma-based Dune HD models.

- New feature: IP Control functionality is now partially supported.
  Currently, only the possibility to emulate RC button presses is supported
  ("ir_code" command).
   - The protocol is the same as was previously used in Sigma based Dune HD
     models: http://dune-hd.com/support/ip_control
   - NOTE: When the player is in standby mode, IP Control can not be used
     when "Sleep" or "Power off" mode is used (in these modes, CPU and OS
     are not running and can not handle IP Control commands), it can only
     be used when "Software standby" mode is used. "Software standby" mode
     is currently supported only for Pro 4K model and old Sigma based
     models; it is currently not supported for Neo 4K, Neo 4K T2, Neo 4K T2
     Plus, Sky 4K Plus models. So, for Neo 4K, Neo 4K T2, Neo 4K T2 Plus,
     Sky 4K models, IP Control can only be used when the player is not in
     standby mode.

- New feature: Screensaver can now be enabled and configured via "Setup /
  General" menu.

- Improvement: Aspect ratio of video files could be wrongly identified in
  some cases (for anamorphic video files with non-sqaure pixels), that
  caused wrong behavior of the default zoom mode. NOTE: This improvement is
  currently implemented for video files only, not for online video streams;
  for online video streams, the same improvement is planned for a future
  firmware update.

- Improvement: Auto framerate and auto resolution did not work properly for
  23.976p/24p SD video.

- Improvement: Auto framerate did not work properly for 23.976p/24p video
  when 4K video mode was used and 50/60 (no 24p) auto framerate mode was
  used. In this case, 4Kp29/4Kp30 video was wrongly chosen instead of
  4Kp59/4Kp60.

- Improvement: Auto resolution for almost-FullHD video (such as 1912x1072
  instead of 1920x1080) now works by switching to FullHD video mode (the
  previous behavior was to consider such files as having no matching video
  mode and keep the previous video mode).

- Improvement: The default value of system setting "HDMI Range Mode" is
  changed from "Auto" to "Limited" to improve compatibility with some HDMI
  equipment.

- Improvement: When working with Movies or My Collection functions, the
  performance of loading movies information improved (especially when using
  slow Internet connection).

- Improvement: The UI for choosing time zone in the initial setup wizard is
  now more convenient.

- Improvement: When the player is booting, unneeded picture flickering
  which could previously happen before showing the main menu is now
  eliminated.

- Bugfix: Some ISO files (with 16-bit filenames encoding) were not
  recognized and could not be played.

- Bugfix: When working with SMB shares which require user/password, files
  on these shares could not be accessed in some cases.

- Bugfix: When connecting via SMB to a host which has multiple IP
  addresses, wrong IP address could be used and thus the host could not be
  accessed in some cases.

- Bugfix: Wi-Fi connection to a network without a password did not work.

- Bugfix: Adding Android applications to "Favorites" menu did not work
  properly in some cases.

- Bugfix: When working with Movies or My Collection functions, when
  navigating through the UI, there were various minor bugs in the shown
  information in some rare cases.

- Bugfix: When starting a plugin which requires network connectivity, the
  system could hang in some rare cases.

- Bugfix: When starting a plugin which uses icon archive functionality, the
  system could hang in some rare cases. Also, the performance of icon
  archive downloading improved.

- Bugfix: After settings reset, when the initial setup wizard is shown, and
  a local storage device with *.dsf or *.dff files is connected, a special
  service dialog listing these files could be wrongly shown.

- Improvements for PHP plugins and PHP API:

    - New feature: A possibility to emulate RC button presses (same as in
      Sigma based Dune HD models) is now available for PHP plugins.

    - New feature: "android_platform" parameter is now available via
      "/tmp/run/versions.txt" and "/firmware/config/android_platform.txt".

    - Bugfix: Loading images via HTTP URL which redirects to HTTPS URL did
      not work in some cases.

- Updated/improved UI translations for some languages.

- Some other minor improvements/fixes.

Version "180426_1318_r13"
Download: dune_firmware_tv292a_180426_1318_r13.dff
Changes since 180320_1247_r13:
- New feature: Google Play Store and Google Services support added, with a
  unique possibility to easily enable/disable Google Services depending on
  user needs (when disabled, they are not installed, do not perform various
  things in background, do not consume system resources). Google Services
  are initially disabled and are automatically enabled when pressing
  "Google Play Store" icon in "Android applications" section for the first
  time. After Google Services are enabled, they can be disabled by
  resetting settings to factory defaults.

- New feature: Added a new setting "Audio / Digital audio connector" with
  options "HDMI (HD audio enabled)" (default) and "S/PDIF (HD audio
  disabled"). Should be set to "S/PDIF (HD audio disabled)" when outputting
  audio in bitstream mode to S/PDIF (or to HDMI equipment not supporting HD
  audio).

- New feature: Added setting "Setup / Misc / Encodings / Subtitles
  encoding" which allows to specify subtitles encoding (same as on Sigma
  models).

- New feature: REPEAT and SHUFFLE functions for playlists are now
  implemented (same as on Sigma models).

- New feature: Sleep timer is now implemented (same as on Sigma models,
  works only when working with Dune HD GUI). By default it is disabled. It
  can be enabled via the new setting "Setup / Misc / Power manamenent /
  Sleep timer".

- New feature: Discrete power-on and power-off IR codes are now supported
  (codes 5F and 5E, same as on Sigma models).

- Improvement: List of audio tracks and subtitle tracks now shows more
  information (and more correct information) about tracks.

- Improvement: YouTube icon (in "Android applications") now installs a
  newer version of YouTube, with 4K video support.

- Improvement: CEC is now disabled by default.

- Improvement: VFD display now shows current time in 24 hour format (same
  as it is shown on TV screen).

- Improvement: In initial setup wizard, the suggested by default timezone
  is now automatically detected based on GeoIP (when Internet is
  accessible).

- Improvement: In initial setup wizard, if the connected TV supports 4K, 4K
  resolution is now recommended by default.

- Improvement: When UI Type 1 is used, "Android applications" section is
  now also available.

- Improvement: When UI Type 2 is used, the "Applications" tab now has a
  proper title "Applications" (rather than "Dune HD Applications").

- Improvement: On power-on, an unneeded extra HDMI reinitialization took
  place.

- Improvement: In System setup menu, some unneeded and non-working
  Android-related settings are removed.

- Improvement: Debug dump now includes more useful information.

- Bugfix: It was possible to exit standby mode by various wrong IR codes.

- Bugfix: It was possible to exit standby mode by switching the connected
  HDMI equipment on/off.

- Bugfix: Some AVI files could not be played.

- Bugfix: Playback crash could happen when stopping or finishing playback.

- Bugfix: Player could randomly reboot in some rare cases.

- Bugfix: When saving debug dump to NTFS-formatted storage device, the
  system could hang.

- Bugfix: SD cards were wrongly mounted read-only.

- Bugfix: In some rare cases, GUI could stop responding to any RC button
  presses.

- Improvements for PHP plugins and PHP API:

   - New feature: New action "RESTART" is introduced, with parameter
     "reboot" (possible values "yes" and "no"), which allows the plugin to
     request GUI restart or full reboot. 

   - New feature: "PLUGIN_OPEN_FOLDER" action is extended with the new
     parameter "sel_id", which can be used to preselect the given item in
     regular folders (value is media_url of the item to preselect).

   - New feature: For TV plugins which support TV archive (catchup),
     LEFT/RIGHT RC buttons can now be used to switch to archive mode and
     seek in the archive even in Live TV mode. For TV plugins which do not
     support archive, LEFT/RIGHT RC buttons are now correctly ignored in
     Live TV mode.

   - New feature: "PLAYBACK_STOP" action now supports the following
     additional parameters: "plugin_vod_stop_position",
     "plugin_vod_duration", "plugin_vod_start_tm", "plugin_vod_stop_tm",
     "plugin_vod_prebuffering_end_tm".

   - Improvement: When loading images from HTTPS, the performance is now
     improved.

   - Improvement: When PHP plugin uses auto-resume functionality,
     "ip_address_required" setting is now enabled by default for this
     plugin.

   - Improvement: Icon archives are now loaded with improved performance
     and reliability.

   - Improvement: folder ".platform.android" can now be used to store
     Android-specific versions of platform-dependent plugin files (such has
     native executables) in the plugin (similar to ".platform.87xx" folder
     that can be used for SMP87xx-specific files).

   - Bugfix: "/tmp/run/ext_command.state" was not implemented; now it
     contains the information about current playback state (same as on
     Sigma models).

   - Bugfix: Playback timer did not work.

   - Bugfix: Saving/restoring playback position during auto-resume and
     setting initial playback position using
     PluginVodInfo::initial_position_ms did not work properly.

   - Bugfix: In "PLAYBACK_STOP" action, in rare cases,
     "plugin_vod_series_ndx" and "plugin_tv_channel_id" parameters could
     contain wrong information.

   - Bugfix: When switching to playlist item N, the next item (N+1) was
     actually wrongly used.

   - Bugfix: In TV OSD, crash could occur in some specific cases when
     trying to scroll through the list of TV channels.

- Updated/improved UI translations for some languages.

- Some other minor improvements/fixes.

NOTE: In comparison with the version 180317_0153_r13, this firmware version
also includes the following changes which were included in the version
180320_1247_r13:

- New feature: Added a new setting "Misc / Power Managment / POWER button
  behavior" with options "Power off" (default) and "Software standby".
  "Software standby" means that CPU and OS services continue running when
  the player is in standby mode (useful when NAS functionality such as SMB
  server is used) (same as on Sigma models).

- New feature: long-pressing "POWER" RC button shows a menu with options
  "Power off" (put the player in "Power off" standby mode) and "Restart"
  (reboot the player).

- New feature: Subtitles visualization settings (vertical offset, color,
  font) are now remembered (same as on Sigma models).

- New feature: Added a new setting "Video / Advanced / Preferred HDMI color
  depth" with options "Maximum" and "As in content" to allow even more
  precise control of all parameters of HDMI signal. "Maximum" (default)
  means use HDMI color depth supported by the connected HDMI equipment
  (according to "Maximum HDMI color depth" setting), even if content with
  lower color depth is played (e.g. output 10 bit when outputting to a TV
  supporting 10 bit when 8 bit content is played). "As in content" means
  use HDMI color depth as in content, even if the connected HDMI equipment
  supports higher color depth (e.g. output 8 bit when outputting to a TV
  supporting 10 bit when 8 bit content is played).

- Improvement: Default video settings and "Auto" logic of video settings
  now work in a way which ensures a better compatibility with some
  projectors.

- Improvement: In "Video / Advanced" menu, confirmation dialogs are shown
  when attempting to change settings which usually should not be changed
  without a reason.

- Improvement: When performing "Reset Settings" action, a message is now
  shown while the system is handling it.

- Improvement: On power-on, front panel LED indicator is now switched to
  blue color immediately.

- Bugfix: ISO with quotes in filename could not be played.

Version "180320_1247_r13"
Download: dune_firmware_tv292a_180320_1247_r13.dff
Changes since 180317_0153_r13:
NOTE: This is the first official version which was shipped in some world
regions.

- New feature: Added a new setting "Misc / Power Managment / POWER button
  behavior" with options "Power off" (default) and "Software standby".
  "Software standby" means that CPU and OS services continue running when
  the player is in standby mode (useful when NAS functionality such as SMB
  server is used) (same as on Sigma models).

- New feature: long-pressing "POWER" RC button shows a menu with options
  "Power off" (put the player in "Power off" standby mode) and "Restart"
  (reboot the player).

- New feature: Subtitles visualization settings (vertical offset, color,
  font) are now remembered (same as on Sigma models).

- New feature: Added a new setting "Video / Advanced / Preferred HDMI color
  depth" with options "Maximum" and "As in content" to allow even more
  precise control of all parameters of HDMI signal. "Maximum" (default)
  means use HDMI color depth supported by the connected HDMI equipment
  (according to "Maximum HDMI color depth" setting), even if content with
  lower color depth is played (e.g. output 10 bit when outputting to a TV
  supporting 10 bit when 8 bit content is played). "As in content" means
  use HDMI color depth as in content, even if the connected HDMI equipment
  supports higher color depth (e.g. output 8 bit when outputting to a TV
  supporting 10 bit when 8 bit content is played).

- Improvement: Default video settings and "Auto" logic of video settings
  now work in a way which ensures a better compatibility with some
  projectors.

- Improvement: In "Video / Advanced" menu, confirmation dialogs are shown
  when attempting to change settings which usually should not be changed
  without a reason.

- Improvement: When performing "Reset Settings" action, a message is now
  shown while the system is handling it.

- Improvement: On power-on, front panel LED indicator is now switched to
  blue color immediately.

- Bugfix: ISO with quotes in filename could not be played.

- Some other minor improvements/fixes.

Version "180317_0153_r13"
Download: dune_firmware_tv292a_180317_0153_r13.dff
The first official version ever shipped with production players.